Home > Products > Electronic Cigarettes > KIT - Eleaf iStick 100W TC Box Mod ( White )
KIT - Eleaf iStick 100W TC Box Mod ( White )
KIT - Eleaf iStick 100W TC Box Mod ( White )
  • KIT - Eleaf iStick 100W TC Box Mod ( White ) image 1
  • KIT - Eleaf iStick 100W TC Box Mod ( White ) image 2
  • KIT - Eleaf iStick 100W TC Box Mod ( White ) image 3
  • KIT - Eleaf iStick 100W TC Box Mod ( White ) image 4
  • KIT - Eleaf iStick 100W TC Box Mod ( White ) image 5
  • KIT - Eleaf iStick 100W TC Box Mod ( White ) image 6
  • KIT - Eleaf iStick 100W TC Box Mod ( White ) image 7

€ 49.20

KIT - Eleaf iStick 100W TC Box Mod ( White )

Eleaf has finally released the long awaited dual-18650 iStick 100W TC with parallel circuitry. This type of circuit means you can operate the device even if there is only one 18650 battery inside the case. Even with a single battery, you get a maximum output of 75W - very, very impressive. In addition to parallel circuits, the iStick 100W TC boasts a wonderful array of features and very high quality materials, it is a true vaping masterpiece. The body is made of 7075 aluminium, the kind used in space technology. It is comprised of magnesium, copper, zinc, silicon, chromium, manganese, titanium, iron and other metals. In terms of strength, 7075 aluminium is on par with steel but it is very light and extremely resistant to corrosion.

The iStick 100W TC is designed with a wholly new firing button, the whole curved section that falls under the tip of the fingers is the fire button (bar). This is a substantial development in terms of ergonomics, the problems with being left or right-handed are now history. Being proactive, Eleaf devised the fire bar with a lock/unlock switch so there is no accidental firing. Speaking of firing, the iStick 100W TC takes two 18650 batteries. It can fire at 100W all the way down to 0.05Ω in temperature control mode. You can monitor, set and adjust coil temperatures when using nickel, titanium or 316 stainless steel coils. This lets you control vapor temperature and greatly improves your vaping experience. It is also a very useful feature because it helps eliminate dry hits. The sophisticated temperature control suite also includes an adjustable TCR mode with three memory slots for even more precise temperature output. You can also set a base resistance, a feature that ensures strong and consistent vapor performance throughout the life of the coil. The bottomline is a fabulous vapor performance with utterly phenomenal flavor delivery.

The iStick 100W TC sports a razor sharp, progressive chipset that regulates every function of the device, plus it allows for firmware updates as new technologies and features become available. On the side you find a large and bright OLED screen that hosts a wide variety of information. Not only is it easy to read and full of useful information, it is very appealing visually. In line with not fixing what is not broke, the iStick 100W TC is designed with a self-adjusting spring loaded pin that guarantees a solid connection with all types of atomizers.

The battery doors are built with dual magnets for easy snap-on/off action, making switching batteries super simple. We should also mention the iStick 100W TC is equipped with passthrough technology. This means you can vape while your device is being charged. As one would expect, this spectacular box mod features a barrage of safety features that include low voltage protection, temperature protection, atomizer short protection, reverse polarity protection and short circuit protection. It also has a temperature alarm and lock/unlock capability to make it as safe as it can be.

Exceedingly powerful, technologically very advanced and surprisingly budget-friendly, the iStick 100W TC is a superb box mod guaranteed to perform at the highest levels and satisfy in every regard.

Eleaf iStick 100W TC Overview

Maximum 100W Output
• 0.1Ω to 3.5Ω
• Firmware upgradeable

TCR Controllable Temperature Output
• Ni200, titanium and 316 stainless steel
• Three TCR modes
• Can lock in base resistance
• 93°C to 315°C (200°F to 600°F)
• Firmware upgradeable
• 0.05Ω to 1.5Ω

Parallel Circuitry
• Can work with only one battery (75W maximum output)

Stealth Firing Bar
• One of the battery doors doubles as the firing bar
• Firing bar can be locked to prevent accidental firing
• Very comfortable and ergonomic

Dual-Magnet Battery Doors
• One on each side
• Takes two high amperage 18650 batteries

Central Control Panel
• All buttons on flat surface
• Bright, easy to read OLED screen

General

• Dimensions: 52mm x 23mm x 94mm (2.05" x 0.9" x 3.7")
• 1A Micro USB port for charging and firmware updates
• Self-adjusting spring loaded pin
• Loads of safety features

FIRMWARE UPDATES - Please click here. The downloads are towards the bottom of the page.

The package contains:

1 × Eleaf iStick 100W TC Box Mod (White)

1 × User Manual

Product Videos:

Product Extra Info:

→ You will need two high amperage 18650 batteries. For suitable batteries, please click here.

→ To view matching atomizers for the Eleaf iStick 100W TC, please click here.

→ Electronic cigarettes need e-liquids to work; if you don't already have liquids, or would like to browse through our extensive range, please click here to view our exceptionally smooth tobacco blends or here for our delicious fruity and exotic blends.

Comments